Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Trolling the AI

  1. #11
    Senior Member littlebittybobby's Avatar
    Join Date
    Feb 2022
    Posts
    1,889
    okay---wait a second here. the deal is----Van Houtens do more closely resembles that of Uma Thurman in "pulp fiction", back in 1994(see photo). but yeah----may be that's just one reason the parole board did not feel confident in paroling her sooner. it may've bee an indicator that she was still a "bad girl". yup. 2024-04-29 (5).jpg

  2. #12
    Senior Member littlebittybobby's Avatar
    Join Date
    Feb 2022
    Posts
    1,889
    okay----because i think it is essential for me to keep you kids informed---here's another photo of ms van houten, manson-follower. (see photo) 2024-04-29 (6).jpg b2024-04-29 (6).jpgut2024-04-29 (6).jpg yeah---this time she's got it more permed. and i accidently clicked the darn button and it wouldn't take, so i clicked it again, and this time it spit out three photos. this is not intentional on my part; it's is a technical problem. i'll hafta consult someone who knows more about 'puters than i do. yup.

  3. #13
    Senior Member littlebittybobby's Avatar
    Join Date
    Feb 2022
    Posts
    1,889
    okay----i kinda made peace with my ai now that i see its limitations, for the most part. hope that helps you some.

  4. #14
    Senior Member littlebittybobby's Avatar
    Join Date
    Feb 2022
    Posts
    1,889
    okay-----even though i have many ongoing projects to complete, i took the time to see if i could stump the ai on my 'puter. so anyway---i axed the ai a simple quession(see photo), to which it responded with a playing-dumb answer. no doubt a passive-aggressive form of pc-ness. yup. but yeah---by comparison googling the same zact query brought up a discussion on the subject from u-penn(see photo), that had a lot to say about the subject. see? i figure that says a lot about so-called ai, and how it usually has leftist biases engineered into it. yup. hope that helpps you kids. thankk mee. 2024-05-01 (5).jpg2024-05-01 (6).jpg

  5. #15
    Senior Member littlebittybobby's Avatar
    Join Date
    Feb 2022
    Posts
    1,889
    well, okay----the ai demonstrated that it isn't so dumb & liberalistic after all; it actually heped me out with my littlebitty van project! so anyway---the issue was, the very inexpensive imported posi i purchased came with two bearings that i pressed on the carrier, but guess what? it wouldn't fit in the axle housing. i consulted the ad littterchure, and it said it fits GM 8.5, 8.6 housings w/30 spline axles. How-ev-er the bearing they sent with it are used to fit the posi in the 8.6 housing. Sooo, i did some measuring and determined the i.d./o.d. dimensions of the bearing set i actually needed. but then---i consulted the ai, not really expecting a definitive answer, but guess what? it said yeah, ta retrofit one a them aftermarket 8.6 carriers inta an older housing designed for the 8.5 carrier, you use: then gave bearing & matching race numbers! so yeah---i ran those through ebay, and there's a guy outside o' ames, iwah, selling bearing sets with those zact numbers, and states this is what you use(in a zact case like mine). prollem solved. we hope! should arrive wednesday. the local parts houses would be clueless, i know that. soo, tomoroww i have to remove the brand-new but WRONG bearings i already pressed on, and to do that you have to destroy them UNLESS you want to spend $100 on a special dedicated bearing puller & wait for IT to arrive. See? i take two steps forward, then slip back one, on a regular basis. that's my version of progress. maybe i oughtta just TRADE(get screwed) for a nice, clean, safe NEW Subbbarrrooo! ha. yeah, right. hope that helps you kids some. thankk mee.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •